Skiving Roller Burnishing Machine for Cylinder tube

Send Inquiry

Product Code : TG2125x6000mm

Brand Name : Guanlu

Price And Quantity

Minimum Order Quantity
1
Unit of Measure
Set/Sets

Price
46000 USD ($)

Product Description

CNC System Skiving Roller Burnishing Machine for Cylinder tube

Product Description

General machine layout and main parts structural detail:

Machine components

The machine tool is composed by the bed body, head of a bed frame, feeding oiler, oiler feeding system, boring bar, boring bar drag plate feeding system, the work support, boring bar support, work calipers, chip removal filter system, hydraulic system, cooling system, CNC electrical system, automatic lubrication system and other major parts.

Machine casting

Machine tool bed body, head box, boring bar enclosure, boring bar box plate, oil casing, work support body and the caliper parts use resin sand molding, high quality cast iron manufacturing, reasonable structure, went by vibration aging treatment, to ensure the machine tool having good rigidity, high strength and good accuracy stability.

Machine bed body

The width of machine tool bed body is 800 mm, and the height is 680 mm, with the bed body integral casting, vibration aging treatment, high stability, on both sides of the bed body is equipped with tank to cool oil and return back conveniently, prevent the coolant spillover, the bed body processing two rectangular guide rails, width of guide rails is 130 mm, thickness is 50 mm, total span of guide rails is 600 mm, guide rail by the medium frequency quenching, quenching depth is 3 mm, fine grinding, high rigidity, high precision, high wear resistance, despite the long time continuous work can still maintain a high stability and high precision, stability is better than line track. Bed body is installed on the head of a bed head bracket, boring bar box drag plate, grant oiler, boring bar support, the workpiece bracket, calipers. Head of the head of a bed frame and boring bar boxes, grant oiler, boring bar support, main shaft concentricity of the calipers use manual shovel assembly process to install, alignment of each hole is less than 0.03 mm, in the middle of the bed body guide rail, install Taiwan precision rack at one end, install 80 t screw at the other end, installation, the parallelism of installation and guide rails is less than 0.03/1000 mm.

Machine mainly parameters:

	Item	Parameter
Working scope	Boring hole diameter range	38-250mm
Working scope	Workpiece length	3000mm
Boring bar box spindle parameters	Center height	> 350mm
	Leading end of cone hole boring bar box Spindle	85mm 1:20
	The spindle speed range	50-1000r/min Ac frequency conversion stepless speed regulation)
	Output shaft torque	1500N.m
Feed parameters	Feed speed range	5-2000mm/min(stepless)
Feed parameters	Plate moving fast	3m/min
Machining accuracy	Locate the length	0-6m
	Workpiece surface roughness of boring	Ra 3.2 m
	Workpiece surface roughness of rolling	Ra0.4 m
	Workpiece machining straightness	0.05/500 mm
	Workpiece machining roundness	0.036/200mm
Motor capacity	Boring bar motor power	60KW Ac servo motor
	Feed motor	48NM Ac servo motor
	Hydraulic pump station motor	3KW Ac motor
	Output cooling pump motor power	11KW one set, 7.5KW one set
	Automatic chip removal motor power	1.5KW one set
	Magnetic separator motor power	0.75KW one set
	Centralized lubrication motor	0.75KW one set
Others	Head of the biggest pre-tightening force for the workpiece	50KN
	The cooling system flow	600L/min
	Cooling system rated pressure	0.36Mpa
	Magnetic separator flow	600L/min

Packaging & Shipping

Before shipment, every part of machine will be painted with a layer of anti-rust and water-proof oil to prevent possible erosion during transportation.
A plastic cover to wrap around machine parts to enhance corrosion prevention.
Export standard fumigated wood cases are measured and specially made for packing.
Steel wire will be used to tighten and strengthen the packages inside container.

Trade Information

FOB Port
Tianjin
Payment Terms
Telegraphic Transfer (T/T), Letter of Credit at Sight (Sight L/C), Letter of Credit (L/C)

Supply Ability
20 sets Per Year
Delivery Time
4 months after receiving the deposit Months

Packaging Details
1. Before shipment, every part of machine will be painted with a layer of anti-rust and water-proof oil to prevent possible erosion during transportation. 2. A plastic cover to wrap around machine parts to enhance corrosion prevention. 3. Export standard fumigated wood cases are measured and specially made for packing. 4. Steel wire will be used to tighten and strengthen the packages inside container.
Certifications
CE ISO